Sink is an essential part of the kitchen, is also commonly used as a tool in life, because it is a very humble thing, so often in the purchase of kitchen utensils will ignore the choice of the sink, which is a Wrong approach. Not underestimate the sink, the election to a good sink, but also make your kitchen just right, this piece of equipment can also reflect the master’s taste of life.
The following on how to choose the kitchen sink for everyone to explain in detail.
How to buy kitchen sink?
1, thickness
Stainless steel sink is the best choice of plate thickness 0.8-1.2mm or so, you can choose 304 # material of stainless steel, this tank is more resilient. It can also maximize the avoidance of damage caused by the impact of the test can be pressed when the tank surface hard to see if strong, if you can press it, it shows that the material is very thin, it should be chosen carefully.

2, thin
You can see the bottom part when you choice the sink, the best choice of sink side is relatively small, so you can let the sink has the largest washing space, and spilled out from the inside of the water can easily wipe the sink to go inside.

3, weight
Stainless steel is a ferroalloy, which adds a nickel, chromium heavy metals, so the heavier than the weight of pure steel, counterfeit products in general will be lighter weight. You can judge from this point.

4, process
Stainless steel sink welding methods generally have two kinds, one is pots and panels welded together. Generally,this shape is more beautiful, not easy to find the weld and the tank surface is relatively smooth, but the firmness remains to be seen.Another one is two single-basin butt welding into one, this more solid and practical, but easy to see traces of welding, flatness is relatively poor.

5, the depth
At present, the domestic general use of the tank height of 180mm or more, because the capacity of large and can prevent water splashing effectively.

6, the surface roughness
Sink surface smoothness is the quality of inspection and the most intuitive standard, you can keep the line of sight with the sink plane to look at, should ensure that the edge of the sink is not convex and warping and so on. Error should be less than 0.1mm, flatness of the sink is not good, not only affect the appearance, but also easy to seepage or accumulation of oil and so on.

7, accessories
The quality of the sewer and the water pipe will be directly related to the use of the sink, it is very important, good sewer material should be PP material or UPVC, this material is relatively high sealing, flexible, heat, crack, And long service life, shape design is reasonable, with deodorant, easy to install, not prone to congestion, water and so on.
8, silencer processing
Under normal circumstances the bottom of the sink will have a silencer mat or silencer coating, with a leak to prevent seepage and reduce noise and other functions. If you do not have this function, it shows the quality of the sink is relatively poor.